Wholesale car phone mounts and holders
Air-vent, dashboard and windscreen suction, cup-holder and rear-view mirror phone mounts, magnetic holders in aluminium and zinc alloy, 15 W wireless-charging car mounts with auto clamp, silicone charging pads and headrest tablet holders. Buy them at the factory minimum or in retail packaging with your brand.
Plain mounts need GPSR labelling only. Mounts with wireless charging are radio equipment, so before you order we tell you which CE declaration and test data the manufacturer can show for that exact model.
37 products in this category
Factory minimum and an indicative net “from” price on every card. Open a product for clamp range, mounting type, charging data and branding options.
Car Mount with 15W Wireless Charging, Gravity Clamp and Suction Base
from €40.25 net
Magnetic Vent Car Mount with 15W Wireless Charging, MagSafe Compatible
from €10.64 net
Non-Slip Silicone Car Pad with 15W Wireless Charging
from €14.95 net
Foldable Magnetic Phone Holder with Vacuum Suction Base
from €2.88 net
Zinc Alloy Magnetic Car Phone Holder with Suction Cup
from €3.42 net
Magnetic Phone Mount with ON/OFF Locking Vacuum Suction Base
from €8.88 net
Gravity Air Vent Car Phone Holder, ABS Plastic
from €1.87 net
2-in-1 Car Phone Holder: Telescopic Suction Mount and Air Vent Clip
from €4.66 net
Foldable Alloy Magnetic Phone Holder with Nano Suction Base, Orange
from €17.83 net
Air Vent Car Phone Holder with Metal Hook
from €6.21 net
Suction Cup Car Phone Holder with Telescopic Arm and Vent Clip
from €2.44 net
Car Phone Holder 4–9" with Gel Suction Cup and Telescopic Arm
from €4.89 net
Car Phone Holder with Sticky Suction Base and Extendable Arm
from €6.41 net
Suction Cup Car Phone Holder with Long Curved Arm
from €8.28 net
Car Phone Mount with Wireless Charging and Auto Clamp
from €31.63 net
15 W Wireless Charging Car Mount with Auto Clamp and Type-C Port
from €18.69 net
15 W Wireless Charging Car Holder with Infrared Auto Clamp
from €14.32 net
Magnetic Car Mount with 15 W Wireless Charging and Ambient Light
from €23.72 net
Cup Holder Phone Mount with Extra Cup Holder
from €19.84 net
Cup Holder Phone Mount on a Tall Arm with Ball Joint
from €12.13 net
Cup Holder Expander with Phone Mount on Adjustable Arm
from €15.81 net
Suction Cup Car Phone Holder with Arm Extending to 25 cm
from €3.80 net
Car Phone Holder 4.2–7.2": Suction Mount or Air Vent Hook
from €6.87 net
Suction Cup Car Phone Holder with 10–15 cm Telescopic Arm
from €6.35 net
Carbon-Look Suction Cup Phone Holder for Cars and Trucks
from €3.54 net
Rear-View Mirror Phone Holder with 720° Rotation and Telescopic Arm
from €3.59 net
Suction Cup Car Phone Holder with Ball Joint and Auto Clamp
from €4.54 net
Suction Cup Mount with Flexible Arm for Phone and Action Camera
from €4.17 net
Extendable Car Headrest Tablet Holder 7–13"
from €4.74 net
Stick-On Aluminium Magnetic Disc Phone Holder
from €1.44 net
Windscreen Suction Mount for Tablets and Phones 4.7–12.9"
from €21.56 net
Rear-View Mirror Phone Holder with 360° Rotation
from €4.08 net
Rear-View Mirror Phone Holder with Auto Clamp and Extendable Arm
from €6.01 net
Rear-View Mirror Phone Holder with Ball Joint, Black and Green
from €2.21 net
Rear-View Mirror Phone Holder with Three Clips and Telescopic Arm
from €11.18 net
Gooseneck Car Phone Holder with Suction Cup
from €9.49 net
Foldable Magnetic Ring Phone Holder for Car and Desk, Zinc Alloy
from €11.27 net
Buying guide
Phone holders sell all year, peak with spring and summer driving and come back fast when a suction cup lets go on a hot day or a vent clip breaks a louvre. For a car phone holder wholesale order the unit price is only the start: the grip type, the base, the materials and the carton count decide the margin and the return rate. We work with partner factories on factory-direct supply, but we are an importer, not a manufacturer: what you get from us is the sourcing, the inspection and the EU paperwork around the product.
What is in the range
Gravity and auto-clamp vent mounts with metal hooks; suction mounts with telescopic, curved or gooseneck arms and nano-gel or lever suction cups; magnetic holders in aluminium or zinc alloy with N52 magnets, adhesive discs and foldable ring stands; cup-holder mounts on tall arms and cup-holder expanders; rear-view mirror holders with spring clips; 10 and 15 W wireless-charging mounts with infrared auto clamp, magnetic charging mounts with ambient light and non-slip silicone charging pads; windscreen mounts for 4.7–12.9 inch tablets and headrest holders for 7–13 inch tablets. All mounts are universal: we state the clamp range in inches or millimetres, not a list of car models.
What we ask for
Clamp range, base type and materials such as ABS, PC, silicone or alloy for every mount. For wireless-charging mounts we request the EU declaration of conformity under the Radio Equipment Directive 2014/53/EU together with EMC and RoHS, plus input and output data; they run on 12–24 V or USB in the car, so the Low Voltage Directive does not apply. Charging power is the manufacturer's figure and depends on the phone and cable. Electrical mounts also need the crossed-out bin symbol and WEEE registration in each country of sale. GPSR labelling applies to every model, and we act as the EU importer.
Magnetic mounts and placement
Magnetic holders work with phones that have a built-in magnet ring or a magnetic case; others need the metal plate supplied in the box, so say so on the pack. Rules on where a mount may sit on the windscreen differ by country, and the instructions should tell drivers not to block their view or airbag zones. If you need a mount type or finish that is not in the catalogue, send a link and we source it through manufacturers.
Private label options
Logo on the mount
Pad-printed, laser-engraved or moulded logo on the clamp, the base or the magnetic disc, depending on the material.
Retail packaging
Blister cards, window boxes or kraft boxes with barcode, clamp range, mounting instructions and warnings in your languages.
Colours and specification
Housing colours, a longer arm, a different suction base or a charging coil, agreed with the factory and fixed in a pre-production sample.
Checklist before you order
- Test a suction sample on a textured dashboard and leave it in a warm car for a day
- Check that a vent clip holds a large phone over bumps without bending the louvre
- For wireless-charging mounts, ask for the declaration under the Radio Equipment Directive and confirm the cable and input in the box
- Confirm whether magnetic mounts need a metal plate and include it in the pack
- Plan WEEE and packaging registration in each country before charging mounts go on sale
- Order the spring and summer range by February–March, and gift sets by August–September
Frequently asked questions
What is the minimum order for car phone holders wholesale?
Factory minimums in the catalogue run from 1 to 100 pieces depending on the model. Mounts with your logo or colours typically start at about 300 pieces per model; colours within one model can often be mixed, which we confirm per factory.
Are you a phone mount supplier or a manufacturer?
We are an EU importer and supplier, not a manufacturer. The mounts are made by partner factories; we check the factory before ordering, inspect the goods before shipment and handle import, labels and delivery.
Which documents come with wireless-charging mounts?
We request the manufacturer's EU declaration of conformity under the Radio Equipment Directive, with EMC and RoHS, and the test reports behind it where they exist. If a model has no usable documents, we tell you before you order rather than after.
Do the mounts fit every car?
We do not claim that. The mounts are universal, and we state the clamp range, the base type and the vent clip design so you can judge which vehicles and phones they suit.
Which packaging works for online sales?
For marketplaces a small printed box with barcode and a protective insert usually reduces returns from transit damage. Blister cards suit hanging displays in shops. We quote both so you can compare.
Send us your product list
Links, photos or a spreadsheet are enough. You get delivered prices, minimums, lead times and the documents available for each item within 2 working days.
Request a quote
Send a product list, links or photos. We reply with prices delivered to your country, minimum quantities and lead times.
- Reply on working days, usually within a few hours
- Prices delivered to your door, customs and VAT included in the calculation
- Written offer within 2 working days