Wholesale cordless and corded power tools for workshops
Cordless impact wrenches and impact drivers, drill drivers from 12 to 21 V, cordless and corded hammer drills, angle grinders from 100 to 230 mm, cordless SDS-plus rotary hammers, reciprocating saws, compact cordless screwdrivers and precision electric screwdrivers with bit sets. Buy them at the factory minimum or under your own brand.
For every model we state what the manufacturer declares: voltage, battery capacity, torque, speed and disc or chuck size. Before you order we tell you which CE documents the supplier can show for that exact model and whether the battery fits other tools in the same series.
54 products in this category
Factory minimum and an indicative net “from” price on every card. Open a product for voltage, torque, battery and branding options.
Brushless Impact Driver 20 V, 230 Nm, 3 Speeds, 1/4" Hex
from €64.69 net
Corded Impact Drill 750 W, 13 mm Keyless Chuck, 0–3100 rpm
from €64.40 net
Impact Drill 1100 W, 2-Speed Gearbox, 13/16 mm Keyed Chuck, Side Handle
from €84.24 net
Corded Angle Grinder 125 mm, 1200 W, 230 V
from €60.38 net
Angle Grinder 125 mm, 900 W, with 7-Disc Set
from €69.00 net
Cordless Brushless Angle Grinder 125 mm, 20 V, 3.0 Ah, in Case
from €125.06 net
Corded Reciprocating Saw 1050 W, Variable Speed, 2 Blades
from €97.75 net
Compact Brushless Cordless Screwdriver 16 V, 45 Nm, 1/4" Hex
from €59.23 net
CD120 Cordless Drill Driver 12 V, 2 Speeds, 10 mm Chuck
from €20.13 net
Corded Drill Driver 350 W, 35 Nm, 2 Speeds, 10 mm Chuck
from €43.07 net
Brushless Cordless Hammer Drill 20 V, 50 Nm, 2 × 2.0 Ah Batteries, Case
from €143.75 net
Cordless Mini Screwdriver 3.6 V with 47-Piece Set in Case
from €12.65 net
Cordless Precision Screwdriver Pen 3.6 V with 36-in-1 Bit Set
from €56.06 net
Cordless Screwdriver 3.6 V Li-ion, 47-Piece Set in Case
from €9.86 net
Brushless Cordless Screwdriver 16.8 V, 15–60 Nm
from €72.82 net
Cordless Li-ion Mini Screwdriver — Bare or with 47-Piece Case
from €9.63 net
2-in-1 Brushless Drill Driver 21 V, 2.0 Ah Li-ion
from €48.88 net
Cordless Impact Wrench 21 V, 1/2" Square Drive, up to 320 Nm
from €76.33 net
Folding Cordless Mini Screwdriver with 47-Piece Set in Case
from €18.69 net
Cordless Drill Driver 12 V, 24 Nm, 3/8" Keyless Chuck
from €51.18 net
Cordless Drill Driver 12 / 18 V, 2 Speeds, 25+1 Settings
from €28.75 net
Brushless Cordless Drill 21 V, 2.0 Ah Li-ion, 1/2" Chuck
from €54.63 net
Cordless Drill Driver 12 V, 1500 mAh Li-ion, 10 mm Chuck
from €26.45 net
Brushless Cordless Hammer Drill 21 V, 120 Nm, 1/2" Chuck, 4.0 Ah
from €103.50 net
Brushless Cordless Impact Drill 21 V, 80 Nm, 10 mm Chuck
from €43.13 net
Angle Grinder 180/230 mm, 2000 W, 220 V, Aluminium Gear Head
from €96.31 net
Cordless Brushless Angle Grinder 125 mm, 21 V, 5000–9000 rpm
from €29.41 net
Cordless Brushless Angle Grinder 21 V, 9500 rpm, 4.0 Ah Battery
from €61.81 net
Cordless Brushless Angle Grinder 125 mm, 20 V, 3.0 Ah, in Case
from €64.11 net
Mini Angle Grinder 100 mm, 800 W, 11,000 rpm, Yellow
from €40.25 net
Heavy-Duty Angle Grinder 230 mm, 2400 W, 6000 rpm
from €190.41 net
Angle Grinder 180/230 mm, 2600 W, 220–240 V, Paddle Switch
from €212.81 net
Angle Grinders 100–230 mm: Cordless 18/20 V and Corded
from €71.88 net
Angle Grinder 230 mm, 3000 W, 220–240 V, Paddle Switch
from €85.96 net
Corded Brushless Angle Grinder 125 mm, 220–240 V, 1250 W, Variable Speed
from €241.50 net
Cordless Mini Angle Grinder 20 V, 3 Speeds, Brushless, in Case
from €73.86 net
Cordless Brushless Angle Grinder 115 mm, 18 V, 4.0 Ah, 2.1 kg
from €316.25 net
Mini Angle Grinder 100/115/125 mm, 650 W, 220–240 V, 10,500 rpm
from €40.25 net
Angle Grinder 115 mm, 750 W, 9000 rpm, Yellow, with Side Handle
from €69.17 net
Angle Grinder 115 mm, 710 W, 220–240 V, 11,000 rpm
from €49.74 net
Cordless Brushless SDS-plus Rotary Hammer 20 V, 26 mm, 3 J
from €199.53 net
Cordless Brushless Rotary Hammer 20 V, 26 mm, 6200 bpm
from €143.75 net
Cordless Brushless Rotary Hammer 26 mm, 3 Functions, Quick-Change Chuck
from €100.63 net
Cordless Brushless Rotary Hammer 21 V, 26 mm, 0–980 rpm
from €235.00 net
Brushless Cordless Reciprocating Saw 20 V, up to 200 mm Cut
from €126.50 net
Hacksaw Frame 12" (300 mm), 18 or 24 TPI Blade
from €3.59 net
Cordless Screwdriver 3.6 V, 250 rpm, 47-Piece Set in Case
from €12.36 net
Precision Electric Screwdriver Pen 3.7 V, 29-in-1 Set
from €28.46 net
Cordless Screwdriver with Bit Storage Tube, 35-in-1 Set
from €47.44 net
Precision Electric Screwdriver 3.7 V, Magnetic Bits, 62-in-1 Set
from €68.71 net
Cordless Drill Driver 12 V, 45 Nm, 2 Speeds, 23-Piece Set
from €37.35 net
Cordless Drill Driver 12 V, 2 Speeds, 10 mm Chuck, in Case
from €35.51 net
Cordless Mini Grinder 16.8 V with 90° Angle Head, 10 Discs
from €152.38 net
Angle Grinder 115 mm, 750 W, Corded 220–240 V, with 10 Cutting Discs
from €40.54 net
Buying guide
Power tools are bought on torque and voltage figures and judged in the first week of use: a chuck that slips, a battery that fades or a grinder that runs hot comes straight back. A high torque number means little until you know how it was measured, the motor type and the battery behind it. For power tools wholesale we work with partner factories on factory-direct terms, but we are an importer, not a power tool manufacturer: what you get from us is the sourcing, the inspection and the EU paperwork around the product.
What is in the range
Brushless impact drivers with 1/4" hex up to 230 Nm and cordless impact wrenches with 1/2" square drive up to 320 Nm (manufacturer figures); 12, 16.8, 18, 20 and 21 V drill drivers and hammer drills with 10 or 13 mm chucks, some with two batteries and a case; corded drills and impact drills from 350 to 1100 W; corded angle grinders from 650 to 3000 W for 100 to 230 mm discs, and brushless cordless grinders for 115 and 125 mm discs; cordless SDS-plus rotary hammers for 26 mm holes; corded and cordless reciprocating saws; 3.6 V mini screwdrivers in 47-piece cases and precision screwdriver pens for electronics work.
What we ask for
Rated voltage and battery capacity in Ah, motor type (brushed or brushless), maximum torque and how it is measured, no-load speed, chuck or drive size, disc diameter and maximum rpm, vibration and noise values, and the charger’s plug type. Power tools fall under the Machinery Directive 2006/42/EC, replaced by the Machinery Regulation (EU) 2023/1230 from 20 January 2027, and under the EMC and RoHS Directives; corded tools and mains chargers also fall under the Low Voltage Directive. We request the manufacturer’s declaration of conformity and test reports and show you what exists. Cordless tools fall under the Batteries Regulation, ship under dangerous-goods rules with UN38.3 test summaries, and every tool needs WEEE marking and registration in the country of sale. For rubber and plastic handles we can request PAH tests under REACH.
Battery platforms and accessories
A cordless range sells better when one battery fits several tools. Ask which models in a series share the same battery and charger before you choose, because matching them later is not always possible. Bare tools without battery, spare batteries, discs, bits and sockets can be ordered with the first batch; impact sockets and bit sets are also on the hand tools page. If you need a tool, voltage or torque class that is not in the catalogue, send the specification and we source it through manufacturers and quote it like any other product.
Private label options
Logo and housing colour
Your brand printed on the housing and battery, in your colours, with matching cases where the model allows it.
Retail boxes and cases
Printed boxes or blow-moulded cases with EAN, specification, GPSR importer data, and manuals and safety warnings in your languages.
Kit and specification
Bare tool or kit, battery capacity, number of batteries, charger plug and included bits or discs, agreed with the factory and fixed in a pre-production sample.
Checklist before you order
- Ask how maximum torque was measured and compare a sample with a tool you already sell
- Check that batteries and chargers are shared across the tools you plan to stock
- Ask for the declaration under the Machinery Directive and, for corded tools, the Low Voltage Directive
- Request UN38.3 test summaries for every battery and plan battery and WEEE registration per country
- Check the plug type of corded tools and chargers for each country of sale
- Order before the March–April and October–November tyre-change peaks, when garages buy impact wrenches
Frequently asked questions
What is the minimum order for wholesale power tools?
Factory minimums in the catalogue run from 1 to 500 pieces depending on the model. Tools with your logo, housing colour and boxes typically start at about 300 pieces per model; a common battery across several tools makes a private-label range easier to build.
Are you a power tool manufacturer?
No. We are an EU importer. The tools are made by partner factories; we check the factory before ordering, inspect the goods before shipment and handle import, labels and delivery.
Are you a cordless impact wrench supplier for tyre shops?
Yes. The catalogue has 1/2" cordless impact wrenches and 1/4" impact drivers, and we can source higher-torque models on request. Torque figures are the manufacturer’s; always check them against the wheel-nut torque your workshop uses and finish with a torque wrench.
Which documents come with a power tool?
We request the manufacturer’s declaration of conformity under the Machinery, EMC and RoHS Directives, plus the Low Voltage Directive for corded tools and chargers, and UN38.3 summaries for batteries. Where a document is missing we tell you before you order.
Can cordless tools go by air?
Lithium batteries ship under dangerous-goods rules, which limits air freight and raises its cost. Most orders go by rail or sea in 25–45 days; bare tools without batteries travel more easily.
Send us your product list
Links, photos or a spreadsheet are enough. You get delivered prices, minimums, lead times and the documents available for each item within 2 working days.
Request a quote
Send a product list, links or photos. We reply with prices delivered to your country, minimum quantities and lead times.
- Reply on working days, usually within a few hours
- Prices delivered to your door, customs and VAT included in the calculation
- Written offer within 2 working days